
Millennium 10 Home Oxygen Concentrator
By Respironics
or 4 interest-free payments of $714.75 with
Comes With
Concentrator, cannula, owner’s manual.
Warranty
1 year warranty on machine.
*Ask about extended warranty
The Millennium M10 is designed to be the highest performing and most reliable 10 liter oxygen machine available. It’s engineered to reduce the cost of providing oxygen for patients who need high levels of oxygen.


Width: 19 in.
Height: 27 in.
Product Specifications
Flow | 1-10 Continuous |
---|---|
Weight | 53 lbs |
Dimensions | 27″ x 19″ x 13″ in |
Noise Level/ How Loud? | 50 Decibels |
FAA Approved | No |
Manufacturer | Respironics |
Storage | -30 to 160 °F Humidity Up to 95%, non-condensing % |
Operating Altitude Range | 0-1,368 Feet |
Power | 120V/60Hz |
What Comes in the Box? | Machine, Cannula, User Manual |
Does it Need to Be Refilled With Oxygen? | No |
Max Oxygen Output | 92 +/- 4% @ 1-2 LPM; 94 +/- 2% @ 3-7 LPM; 92 +/- 4% @ 8-10 LPM |
Alarms | High system pressure, Low system pressure, Power failure, Low oxygen level (OPI model available on the M10605 model only), No oxygen flow |
Accessories | Humidifier Bottle |
CPAP/ BiPAP Compatible? | Yes |


Millennium 10 Air Inlet Filter Kit
By Respironics
or 4 interest-free payments of $2.75 with
The Air Inlet Filter slides into the left side of your Millennium 10 home oxygen concentrator. This filter should be cleaned on a weekly basis (or when dirty) for best performance.
The Air Inlet Filter slides into the left side of your Millennium 10 home oxygen concentrator. This filter should be cleaned on a weekly basis (or when dirty) for best performance. Clean the filter by rinsing it with mild soap and water until it comes out clean, then let air dry completely before placing back into your concentrator. Replace your filter it appears worn or damaged.
Specifications
Manufacturer | Respironics |
---|

Millennium 10 Long life filter kit
By Respironics
or 4 interest-free payments of $5.25 with
The Inlet Prefilter is to be placed inside of the blue chamber of the Clear Inlet Filter for your Millennium 10 concentrator.
The Inlet Prefilter is to be placed inside of the blue chamber of the Clear Inlet Filter for your Millennium 10 concentrator. Your pre-inlet filter should be cleaned monthly (or when dirty) by using mild soap and water to rinse your filter until it is clean. Let your filter air dry completely and then re insert the filter into the inlet filter. Replace your inlet filter when it is damaged or worn.
Specifications
Manufacturer | Respironics |
---|

Millennium 10 Inlet Filter Kit
By Respironics
or 4 interest-free payments of $0.63 with
The Clear Inlet Filter is used to replace the original filter inside your Millennium 10’s rear access door. The filter is equipped with a blue silencer cap to improve noise reduction.
The Clear Inlet Filter is used to replace the original filter inside your Millennium 10’s rear access door. The filter is equipped with a blue silencer cap to improve noise reduction. The inlet filter is designed only to be replaced, not cleaned and it needs to be used with an inlet pre-filter inside the blue chamber. On average, the filter will need to be replaced about once a year.
Specifications
Manufacturer | Respironics |
---|